POSITION SUMMARY
Fabricate, lay out, position, align, and fit parts of structural metal products.
ESSENTIAL FUNCTIONS
Reasonable Accommodations Statement

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.

Essential Functions Statement(s)

• Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
• Verify conformance of work pieces to specifications, using squares, rulers, and measuring tapes.
• Tack-weld fitted parts together.
• Lay out and examine metal stock or work pieces to be processed to ensure that specifications are met.
• Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
• Locate and mark work piece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
• Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting.
• Study engineering drawings and blueprints to determine materials requirements and task sequences.
• Move parts into position, manually or with hoists or cranes.
• Set up and operate fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
• Hammer, chip, and grind work pieces to cut, bend, and straighten metal.
• Smooth work piece edges and fix taps, tubes, and valves.
• Design and construct templates and fixtures, using hand tools.
• Straighten warped or bent parts, using sledges, hand torches, straightening presses, or bulldozers.
• Mark reference points onto floors or face blocks and transpose them to work pieces, using measuring devices, squares, chalk, and soapstone.
• Set up face blocks, jigs, and fixtures.
• Remove high spots and cut bevels, using hand files, portable grinders, and cutting torches.
• Direct welders to build up low spots or short pieces with weld.
• Lift or move materials and finished products, using large cranes.
• Heat-treat parts, using acetylene torches.
• Preheat work pieces to make them malleable, using hand torches or furnaces.
• Install boilers, containers, and other structures.
• Erect ladders and scaffolding to fit together large assemblies.
• And miscellaneous duties as may be required.

POSITION QUALIFICATIONS
Competency Statement(s)

• Accuracy - Ability to perform work accurately and thoroughly.
• Applied Learning - Ability to participate in needed learning activities in a way that makes the most of the learning experience.
• Detail Oriented - Ability to pay attention to the minute details of a project or task.
• Organized - Possessing the trait of being organized or following a systematic method of performing a task.
• Resource Management (People & Equipment) - Ability to obtain and appropriate the proper usage of equipment, facilities, materials, as well as personnel.
• Responsible - Ability to be held accountable or answerable for one’s conduct.
• Safety Awareness - Ability to identify and correct conditions that affect employee safety.
• Technical Aptitude - Ability to comprehend complex technical topics and specialized information.
• Accountability - Ability to accept responsibility and account for his/her actions.
• Reliability - The trait of being dependable and trustworthy.
• Communication, Oral - Ability to communicate effectively with others using the spoken word.
• Energetic - Ability to work at a sustained pace and produce quality work.

SKILLS & ABILITIES
Education: High School Graduate or General Education Degree (GED)

Experience: Six months to one year related experience

Computer Skills

General Computer Skills, Microsoft Office
PHYSICAL DEMANDS
Physical Demands Lift/Carry

Stand

C (Constantly)

Walk

C (Constantly)

Sit

O (Occasionally)

Handling / Fingering

C (Constantly)

Reach Outward

C (Constantly)

Reach Above Shoulder

C (Constantly)

Climb

C (Constantly)

Crawl

C (Constantly)

Squat or Kneel

C (Constantly)

Bend

C (Constantly)

10 lbs or less

F (Frequently)

11-20 lbs

F (Frequently)

21-50 lbs

F (Frequently)

51-100 lbs

N (Not Applicable)

Over 100 lbs

N (Not Applicable)

Push/Pull

12 lbs or less

F (Frequently)

13-25 lbs

F (Frequently)

26-40 lbs

F (Frequently)

41-100 lbs

F (Frequently)

N (Not Applicable)

Activity is not applicable to this occupation.

O (Occasionally)

Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs/day)

F (Frequently)

Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs/day)

C (Constantly)

Occupation requires this activity more than 66% of the time (5.5+ hrs/day)

Other Physical Requirements

Vision (Near, Distance, Peripheral, Depth Perception) Sense of Sound (hear alarms and radios)

Sense of Touch

Ability to wear Personal Protective Equipment (PPE) (hard hats, safety glasses, steel toed shoes, shields, hoods, sleeves, jackets)
WORK ENVIRONMENT
Outdoor Environment, Excessive Heat, Excessive Cold

Job Type: Full-time

Pay: Up to $24.00 per hour

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off

Schedule:

• 10 hour shift
• 8 hour shift
• Day shift

Work Location: One location

Please Note :
apexdining.ca is the go-to platform for job seekers looking for the best job postings from around the web. With a focus on quality, the platform guarantees that all job postings are from reliable sources and are up-to-date. It also offers a variety of tools to help users find the perfect job for them, such as searching by location and filtering by industry. Furthermore, apexdining.ca provides helpful resources like resume tips and career advice to give job seekers an edge in their search. With its commitment to quality and user-friendliness, Site.com is the ideal place to find your next job.